Lokaway 8-10 Gun Safe
$890.00
This safe has a DIGITAL lock – the picture shown shows the keylock version !
This is an easy to operate safe, LOK3DK model 8-10 rifle capacity with ammunition box, with an easy turn handle operation.
Doors slide open, with Swing and Slide technique
Lokaway’s swing and slide technology is the most advanced in anti-pry technology.
Easy to read instructions for use.
Locks / Protection
High security DIGITAL lock with key over-ride
Anti drill plate
4 x bolt down points with hardware (See regulations below)
Lokaway suggests this to have a $8000 cash rating and offers a 5 year construction guarantee.
Legislative requirements for Category A, B and C firearms storage
Section 60 of the Weapons Regulation 1996 (Qld) provides minimum requirements for safe storage of firearms.
For Category A, B and C firearms:
• The container must be of a rigid structure, made of either solid steel or solid timber;
• Rigid structure refers to the strength of the container and the use of reasonable force to the sides or top of the container should not result in deflections of the panel or the container
• The term solid, requires that the container panels are continuous (eg without venting/holes or perforation)
• The container must be either steel (aluminium/alloys are not compliant) or solid timber. Species of timber or structural and marine ply are compliant. Chipboard, particle board, MDF and plaster board are not compliant.
• If the container used for storing these firearms weighs less than 150kg, it must be securely fixed to the frame or floor of a permanent building;
• The container must have a sturdy combination lock, keyed lock or keyed padlock;
• The container must be locked other than for the time to remove/replace firearms; and
• Firearms must be unloaded and the bolt must be removed or action broken for storage. The bolt is a major component part and is subject to same storage requirements as the firearm and can be stored with the firearm.Ammunition must be stored in a secure container or secured area that is separate from the container that holds the firearms; for example a gun safe with a internal secured area for the ammunition (Section 85 and 86 of the Explosives Regulations 2003 [Qld]).
For other states regulations please visit THIS PAGE.
